Be careful: this FAQ is intended for advanced user with good knowledge of the message processor.
To migrate a script used for a COM port to the SMPP driver you need do modification in both files prx and prg.
Modification of the prx file
Open the prx file with a text editor (like notepad++).
1. Change the prototype
Change the line:
<Prototype id="X" name="<ScriptName>" label="<ScriptName>" type="2" running="1">
by
<Prototype id="X" name="<ScriptName>SMPP" label="<ScriptName>SMPP" type="5" running="1">
2. Change the interface
Change the line:
<Interface type="2"><SMS_Origin>0</SMS_Origin></Interface>
by
<Interface type="5"> <API_Timeout>0</API_Timeout> <API_ReverseTime>0</API_ReverseTime> <API_Length>0</API_Length></Interface>
Modification of the prg file
In the prg file you have also some modifications to do:
1. Change the reception function.
You may have a function RECEIVEFROM.
With SMPP driver you need use the function
RECEIVE (sRecMessage, gnTimeout, 1)
2. Change of the message received
The sRecMessage that is returned by the function RECEIVE is an XML format.
To have the message as a COM Port return it you need to write the following code:
